Stirrer Accessories
Arrow Engineering S-316-18 Type 316 Stainless Steel 18" Propeller Shaft
All Arrow Mixing Products' stainless steel mixer shafts are 3/8" dia. & made of 316 stainless steel. These quality mixer parts have a 5/16-24 external thread for easy assembly with all of our stainless steel propellers and couplings. (Note: propeller and coupling sold separately)
Med Vet International Mid-Shaft Positive (Raised) Threaded External Fixation Pins, Medium, J0371B, Each
Positive or raised thread pins have threads extending above the smooth shaft on a portion of the pin. The positive threaded pins have a tougher pull-out resistance and are the external fixation pins used almost exclusively in human orthopedics. There are two choices of pin styles and three different sizes.1. Threaded portion is in mid-shaft2. Threaded portion is at the end of the pinAll pins are 316LVM implant quality stainless steel.
Chemglass Life Sciences Replacement 19mm Stirrer Shaft, Reactor Size: 10L, Fits Support Frame: CG-1965-X-150, Overall Length: 30.6"
Replacement 19mm Stirrer Shaft, Reactor Size: 10L, Fits Support Frame: CG-1965-X-150, Overall Length: 30.6". Precision ground and polished stirrer shaft for use with Chemglass process reactors. Designed to utilize CG-2095 and CG-2096 PTFE agitators. Lower portion of stirrer shaft is sandblasted and has a 3/8¿ wide flat. REPLACEMENT STIRRER SHAFTS ARE FOR USE WITH MECHANICAL SEAL STIR BEARING ON LISTED SUPPORT FRAME.
Bellco Glass, Inc. Impeller Assembly , 25mL
Glass shaft impeller assembly for 1967-style hanging bar spinner flask. Consist of ptfe magnet holder and ptfe coated magnet. MADE IN THE USA. Glass shaft ptfe magnet Size: 25ml
Chemglass Life Sciences Agitator, PTFE, 10mm, Four Blade, 75mm Dia, Fits Shaft Size 10mm, 60° Impeller Angle
Agitator, PTFE, 10mm, Four Blade, 75mm Dia, Fits Shaft Size 10mm, 60¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Available in 45¿, 60¿ and 90¿ impeller angles. The 45¿ and 60¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the stirrer shaft and locks onto shaft with a glass filled TFE screw.
Ace Glass, Inc. PTFE stir blade, 19x76mm, 10mm shafts
19x76mm PTFE stir blade for 10mm O.D. button type stir shafts.
Bellco Glass, Inc. Impeller Assembly , 50-500mL
Glass shaft impeller assembly for 1967-style hanging bar spinner flask. Consist of ptfe magnet holder and ptfe coated magnet. MADE IN THE USA. Glass shaft ptfe magnet Size: 50-500ml CONSIST OF: PTFE MAGNET HOLDER and PTFE COATED MAGNET
Chemglass Life Sciences Agitator, PTFE, 10mm, Four Blade, 75mm Dia, Fits Shaft Size 10mm, 45° Impeller Angle
Agitator, PTFE, 10mm, Four Blade, 75mm Dia, Fits Shaft Size 10mm, 45¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Available in 45¿, 60¿ and 90¿ impeller angles. The 45¿ and 60¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the stirrer shaft and locks onto shaft with a glass filled TFE screw.
Chemglass Life Sciences Stirrer Blade, PTFE, Banana Shaped, Solid, 19mm, Heavy Duty, for 3000mL Flasks, 34/45 minimum joint clearance
Stirrer Blade, PTFE, Banana Shaped, Solid, 19mm, Heavy Duty, for 3000mL Flasks, 34/45 minimum joint clearance. Blade is shaped to resemble the contour of a round bottom flask. Blades are solid. Made of 3/16" PTFE to fit 19mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.
Chemglass Life Sciences Agitator, Turbine, PTFE, 100mm Dia, Fits Shaft Size 10mm
Agitator, Turbine, PTFE, 100mm Dia, Fits Shaft Size 10mm. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Great for use a “foam breaker” at the liquid level in the reactor. Agitator hub is open so that it can be positioned anywhere along the stirrer shaft.
Bellco Glass, Inc. 4 Marine Prop With 1/2" Bore
4" od 316l stainless steel, ra32 finish or betterMarine impeller with 1/2" bore & set screw. MADE IN THE USA.
Bellco Glass, Inc. Glass Ball Impeller Only,250mL
Description: Glass Ball Impeller Assembly Only. MADE IN THE USASize: 250mLScrew Cap: Blue PP, 70mm OD x 22.4mm TCap Seal: Teflon, 67.9mm OD x 9.1mm TSealing Ring: Blue silicone rubber, 66.7mm OD x 47.6mm ID x 4.76mm TFlex Tube: Soft silicone, 41.3mm OAL, 0.312” OD x 0.248” IDMagnet Tube: Type 1 Class A Borosilicate Glass, 95mm OAL, 28mm OD ball, houses one cast alnico magnet
Chemglass Life Sciences Agitator, PTFE, 60°, 50mm OD Blade, Fits 10mm OD PTFE Covered SS Shafts
Agitator, PTFE, 60, 50mm OD Blade, Fits 10mm OD PTFE Covered SS Shafts. Agitator blades are constructed of PTFE with a glass filled PTFE locking nut. This enables them to be attached to the shaft in any vertical position. Note: Designed for use with CG-2079-X, CG-2078-X or CG-2096-X PTFE Covered Stainless Steel type shafts
Chemglass Life Sciences Stirrer Blade, PTFE, Banana Shape, Perforated, 10mm, for 5000mL Flasks, 45/50 minimum joint clearance
Stirrer Blade, PTFE, Banana Shape, Perforated, 10mm, for 5000mL Flasks, 45/50 minimum joint clearance. Blade is shaped to resemble the contour of a round bottom flask. Blades are perforated. Made of 1/8" PTFE to fit 10mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.